Montana AWD V6-3.4L VIN E (2004)
*
Dimension (b) is 12.77 mm (0.503 in) from the center line of the lift gate to the center line of the WB badge.
8. For the THUNDER emblem/nameplate install to the following dimensions:
*
Dimension (A) 100 mm (3.94 in)
*
Dimension (B) 235 mm (9.25 in)
9. For the OLDSMOBILE emblem/nameplate install as shown.
10. For the SILHOUETTE emblem/nameplate install as shown.
11. Heat the mounting surface to approximately 27-41°C (80-105°F) using the J 25070 , if necessary.
12. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
13. Remove the protective liner from the back of the emblem/nameplate.
14. Position the emblem/nameplate to the location marks and press the emblem/nameplate to the mounting surface.
15. Apply equal pressure along the emblem/nameplate to uniformly bond the item to the mounting surface.
Important: Do not touch the adhesive backing on the emblem/nameplate.
16. Remove the protective tape from the mounting surface.