Montana AWD V6-3.4L VIN E (2004)
1. Pull the windshield garnish molding from the A-pillar in order to disengage the retaining tabs and clips.
2. Remove the windshield garnish molding from the A-pillar.
Installation Procedure
1. Align the windshield garnish molding to the headliner and the holes in the A-pillar.
2. Press on the windshield garnish molding in order to engage the retaining tabs and clips.
Trim Panel Replacement - Body Lock Pillar Upper
Trim Panel Replacement - Body Lock Pillar Upper
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the upper seat belt anchor bolt from the belt guide loop.
2. Remove the body pillar upper trim panel retainers using the J 38778 .
3. Remove the upper trim panel from the body pillar by pulling the panel from the locator tabs.
Installation Procedure
1. Align the locator tabs on the upper trim panel with the rear quarter trim panel.
