Montana AWD V6-3.4L VIN E (2004)
2. Align the upper trim panel retainers with the holes and push to secure the panel to the vehicle.
3. Align the slider door seal to the body pillar upper trim panel if applicable.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the upper seat belt anchor bolt to the belt guide loop.
Tighten the bolt to 43 N.m (32 lb ft).
Trim Panel Replacement - Cowl Side
Trim Panel Replacement - Cowl Side
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
1. Remove the front door sill plate. Refer to Door Sill Plate Replacement (Door) (See: Scuff Plate/Service and Repair/Door Sill Plate Replacement
(Door))Door Sill Plate Replacement (Sliding Door) (See: Scuff Plate/Service and Repair/Door Sill Plate Replacement (Sliding Door)) .
2. Remove the cowl side trim panel retainers using the J 38778 .
3. Remove the cowl side trim panel from the vehicle.
Installation Procedure
1. Install the cowl side trim panel to the vehicle by aligning the trim panel with the slots in the cowl.
2. Install the cowl side trim panel retainers by pushing in on the panel to secure.
3. Install the front door sill plate. Refer to Door Sill Plate Replacement (Door) (See: Scuff Plate/Service and Repair/Door Sill Plate Replacement
(Door))Door Sill Plate Replacement (Sliding Door) (See: Scuff Plate/Service and Repair/Door Sill Plate Replacement (Sliding Door)) .
Trim Panel Replacement - Left Body Side Front
