Montana AWD V6-3.4L VIN E (2004)
10. Separate the rear seat back cover away from the foam pad while separating the hook and loop retainers (1).
11. Remove the rear seat back cover from the foam pad.
12. Remove the rear seat back pad from the seat back frame.
Installation Procedure
1. Install the rear seat back pad to the seat back frame.
2. Install the rear seat back cover over the foam pad.
3. Secure the rear seat back cover to the foam pad using retainer rings and the hook and loop retainers (1).
4. Install the rear seat back to the rear seat cushion.
Notice: Refer to Fastener Notice in Cautions and Notices.