Montana AWD V6-3.4L VIN E (2004)
14. Remove the rear seat back cover from the foam pad.
15. Remove the rear seat back pad from the seat back frame.
Installation Procedure
1. Install the rear seat back pad to the seat back frame.
2. Install the rear seat back cover over the foam pad.
3. Secure the rear seat back cover to the foam pad using retainer rings (2) and the hook and loop retainers.
4. Install the armrest. Refer to Armrest Replacement - Rear Seat (See: Interior Moulding / Trim/Arm Rest/Service and Repair/Armrest Replacement
- Rear Seat) .
5. Install the rear seat back to the rear seat cushion.
Notice: Refer to Fastener Notice in Cautions and Notices.
6. Install the recliner bolts.
Tighten the recliner bolts to 32 N.m (24 lb ft).
7. Install the rear seat back foam and cover over the recliner bolts.
8. Install the rear seat back recliner cover. Refer to Seat Back Recliner Cover Replacement - Rear (See: Seat Cover/Service and Repair/Seat Back
Recliner Cover Replacement - Rear) .
