Montana AWD V6-3.4L VIN E (2004)
Power Seat Switch: Service and Repair
Seat Switch Replacement - Power
Removal Procedure
Caution: Refer to SIR Caution in Cautions and Notices.
1. Disconnect the front seat SIR module electrical connector.
2. Disconnect the front seat pretensioner electrical connector.
3. Remove the finish cover screws.
4. Remove the finish cover from the seat adjuster.
5. Remove the adjuster switch from the finish cover.
6. Disconnect the adjuster switch electrical connector.
Installation Procedure
1. Connect the adjuster switch electrical connector.
2. Install the adjuster switch to the finish cover.
3. Install the finish cover to the seat adjuster.
Notice: Refer to Fastener Notice in Cautions and Notices.
4. Install the finish cover screws.
Tighten the screws to 2 N.m (18 lb in).
5. Connect the front seat pretensioner electrical connector.
6. Connect the front seat SIR module electrical connector.