Montana AWD V6-3.4L VIN E (2004)
Power Sliding Door Switch: Service and Repair
Power Sliding Door On/Off-Open/Close Overhead Switch Replace
POWER SLIDING DOOR (PSD) ON/OFF-OPEN/CLOSE OVERHEAD SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Insert a small, flat-bladed tool between the interior lamp/multifunction switch/reading lamp housing and the overhead console.
2. Press inward and down in order to release the interior lamp/multifunction switch/reading lamp housing from the overhead console.
3. Remove the interior lamp/multifunction switch/reading lamp housing from the overhead console.
4. Disconnect the electrical connectors from the interior lamp/multifunction switch.
5. Remove the interior lamp/multifunction switch by using pliers in order to compress the interior lamp/multifunction switch retainers while pulling
switch away from the housing.
INSTALLATION PROCEDURE
