Montana AWD V6-3.4L VIN E (2004)
2. Install the caliper to the caliper bracket.
3. lubricate the brake caliper bolt shaft.
Important: Do not lubricate the bolt threads.
4. lubricate the brake caliper bolt boots (4) in the caliper bracket (3).
Notice:
Refer to Fastener Notice in Service Precautions.
5. Install the brake caliper bolts.
-
Tighten the bolts to 54 Nm (40 ft. lbs.).
6. Use a flat-bladed tool in order to install the caliper bracket boot over the shoulder of the caliper bolt.
7. Remove the plugs in the brake hose end.
Important: Install NEW copper brake hose gaskets (3).