Montana AWD V6-3.4L VIN E (2004)
8. Bleed the brake caliper at the brake caliper bleeder screw.
9. Install tire and wheel assembly.
10. Lower the vehicle.
Rear (Rear Drum)
Brake Hose Replacement - Rear (Rear Drum)
Removal Procedure
Caution:
Refer to Brake Fluid Irritant Caution.
Notice:
Refer to Brake Fluid Effects on Paint and Electrical Components Notice.
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Clean all dirt and foreign material from the brake hoses and the fittings.
3. Remove the brake pipes (1) from the brake hose (2).
4. Remove the retainers from the brake hose at the brackets.
5. Remove the hose from the brackets.
6. Remove the hose.
Installation Procedure
Important: Ensure that there are no kinks in the brake hose.