Montana AWD V6-3.4L VIN E (2004)
19. Remove EBCM if replacing the BPMV only.
Installation Procedure
1. Install EBCM onto the BPMV (1) if replacing the BPMV only.
2. Install BPMV and EBCM as an assembly to the mounting bracket.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the 2 bolts (1) that connects the BPMV assembly to the mounting bracket (2).
^
Tighten the 2 bolts 10 Nm (84 inch lbs.).
4. Install the BPMV bracket to the strut tower.
5. Install the 3 nuts (2) that attach the BPMV mounting bracket to the strut tower.
^
Tighten the nuts to 10 Nm (84 inch lbs.).
^
Reposition any lines or hoses that were moved out of place.
