Montana AWD V6-3.4L VIN E (2004)
11. Install the lower crankshaft position sensor wiring harness bracket to the engine front cover.
12. Install the upper crankshaft position sensor wiring harness bracket to the engine front cover.
13. Install the coolant pump pulley.
14. Connect the radiator outlet hose to the coolant pump.
15. Connect the thermostat bypass pipe to the engine front cover.
16. Install the power steering pump with lines.
17. Install the drive belt tensioner.
18. Install the crankshaft balancer.
19. Fill the engine with NEW engine oil.
20. Fill the cooling system with engine coolant.
