Montana AWD V6-3.4L VIN E (2004)
Exhaust Crossover Pipe: Service and Repair
Exhaust Crossover Pipe Replacement
Removal Procedure
1. Remove the throttle body air inlet duct.
2. Drain the engine coolant from the cooling system.
3. Remove the inlet radiator hose from the engine.
4. Remove the thermostat bypass pipe.
5. Remove the exhaust crossover pipe heat shield bolts.
6. Remove the exhaust crossover pipe heat shield.
7. Remove the exhaust crossover pipe nuts.
8. Remove the exhaust crossover pipe.
Installation Procedure
1. Install the exhaust crossover pipe.
