Montana AWD V6-34L VIN E (2004) Air Door Actuator Replacement
Air Door Actuator / Motor: Service and Repair
Air Temperature Actuator Replacement - Left
AIR TEMPERATURE ACTUATOR REPLACEMENT - LEFT
REMOVAL PROCEDURE
1. Remove the knee bolster.
2. Set the HVAC controls to the vent mode to position the defroster door lever.
IMPORTANT:The HVAC controls must be set to the vent mode to position the defroster door lever for access to the air temperature actuator.
3. Remove the left hand temperature door lever bolt (3) from the HVAC module.
4. Disconnect and remove the left hand temperature door lever spring (2).
5. Disconnect and remove the left hand temperature door lever (1) from the left hand temperature door.
6. Disconnect the left hand air temperature actuator electrical connector.
