Montana AWD V6-3.4L VIN E (2004)
Air Duct: Service and Repair
Air Outlet Duct
Defroster
AIR OUTLET DUCT REPLACEMENT - DEFROSTER
TOOLS REQUIRED
J 38778 Door Trim Pad Clip Remover
REMOVAL PROCEDURE
1. Set the HVAC controls in the VENT mode to close the defroster door.
IMPORTANT:The defroster door must be closed to allow clearance during defroster duct removal.
2. Remove the IP carrier.
3. Remove the side window defogger ducts from the defroster outlet duct.
4. Using the J 38778 remove the defroster outlet duct retaining clips.
5. Remove the defroster outlet duct from the IP carrier.
INSTALLATION PROCEDURE