Montana AWD V6-3.4L VIN E (2004)
Air Register: Service and Repair
Air Outlet Replacement
Floor
AIR OUTLET REPLACEMENT - FLOOR
REMOVAL PROCEDURE
1. Remove the right instrument panel insulator.
2. Remove the left instrument panel insulator.
3. Remove the IP compartment.
4. Remove the center floor air outlet.
5. Remove the screws retaining the floor air outlet.
6. Remove the floor air outlet.
INSTALLATION PROCEDURE
1. Install the floor air outlet.
2. Install the floor air outlet screws.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screws to.....0.9 N.m (8 lb in).
3. Install the center floor air outlet.
4. Install the IP compartment.
5. Install the left instrument panel insulator.
6. Install the right instrument panel insulator.
Center Floor
AIR OUTLET REPLACEMENT - CENTER FLOOR
REMOVAL PROCEDURE