Montana AWD V6-3.4L VIN E (2004)
Condenser HVAC: Service and Repair
CONDENSER REPLACEMENT
TOOLS REQUIRED
-
J 38185 Hose Clamp Pliers
-
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant from the A/C system.
2. Drain the cooling system.
3. Remove the cooling fans with the cooling fan shroud.
4. Reposition the hose clamps to release the radiator lower hose using the J 38185.
5. Remove the radiator lower hose.
6. Disconnect the lower TOC line from the radiator.
7. Remove the A/C discharge hose nut from the condenser block.
8. Disconnect the A/C discharge hose from the condenser block.
9. Cap or tape off the A/C discharge hose.
IMPORTANT:Cap or tape off the open A/C refrigerant components immediately to prevent system contamination.