Montana AWD V6-3.4L VIN E (2004)
10. Remove the evaporator outlet tube nut.
11. Disconnect the evaporator outlet tube and evaporator inlet tube from the TXV.
12. Remove and discard the sealing washers.
13. Remove the heater inlet hose from the heater core.
14. Remove the heater outlet hose from the heater core.
15. Remove the HVAC module to dash panel sound barrier nuts.
16. Remove the HVAC module assembly from the cowl.
INSTALLATION PROCEDURE
IMPORTANT:Ensure proper alignment of the HVAC module assembly and HVAC module drain tube through the cowl.
1. Install the HVAC module assembly to the cowl.
