Montana AWD V6-3.4L VIN E (2004)
Parking Lamp: Service and Repair
PARK/TURN SIGNAL/SIDE MARKER LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the wing nut from the headlamp bracket.
3. Remove the front park/turn signal/sidemarker lamp from the fender.
4. Press the tab while turning counterclockwise to remove the bulb socket from the front park/turn signal/sidemarker lamp.
5. Pull the bulb from the socket.
INSTALLATION PROCEDURE
1. Press the bulb into the socket.
2. Install the socket to the front park/turn signal/sidemarker lamp.
3. Position the front park/turn signal/sidemarker lamp to the fender:
3.1.
Locate the tabs into the fender.
3.2.
Install the tab into the headlamp bracket.
4. Install the wing nut to headlamp bracket and hand tighten.
5. Close the hood.