Montana AWD V6-3.4L VIN E (2004)
10. Remove the suction hose to compressor nut.
11. Disconnect the suction hose from the compressor.
12. Disconnect the compressor electrical connector.
13. Disconnect the engine harness electrical connector.
14. Lower the vehicle.
15. Loosen the right hand engine mount strut, engine side.
16. Remove the right hand engine mount strut bracket brace bolts from the upper radiator support and rotate the strut and bracket rearward.
17. Remove the suction hose.
18. Remove and discard the sealing washers.
19. Cap or tape off the compressor suction port.