Montana AWD V6-3.4L VIN E (2004)
Fuel: Service and Repair
FUEL SYSTEM CLEANING
IMPORTANT: Only use oil free compressed air to blow out fuel pipes. If the fuel filter is plugged, the fuel tank should be inspected internally and
cleaned if necessary.
1. Remove the fuel tank.
2. Remove the fuel sender assembly.
3. Inspect the fuel sender strainer. Replace a contaminated strainer and inspect the fuel pump.
4. Inspect the fuel pump inlet for dirt and debris. Replace the fuel pump if you find dirt or debris in the fuel pump inlet.
IMPORTANT: When flushing the fuel tank, handle the fuel and water mixture as a hazardous material. Handle the fuel and water in accordance with
all applicable local, state, and federal laws and regulations.
5. Flush the fuel tank with hot water.
6. Pour the water out of the fuel sender assembly opening in the fuel tank. Rock the fuel tank in order to be sure that the removal of the water from
the fuel tank is complete.
7. Install the fuel sender assembly.
8. Install the fuel tank.
