Montana AWD V6-3.4L VIN E (2004)
Fuel Pressure Release: Service and Repair
Fuel Pressure Relief Procedure
FUEL PRESSURE RELIEF PROCEDURE
TOOLS REQUIRED
-
J 34730-1A Fuel Pressure Gage
-
J 34730-262 Fuel Pressure Gage Fitting
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery terminal.
2. Remove the fuel pressure connection valve cap.
IMPORTANT: Install the fuel pressure gauge fitting above the belt in order to avoid contact with the belt.
3. Install the J 34730-262 to the fuel pressure connection.
4. Connect the J 34730-1A to the fuel pressure connection. Wrap a shop towel around the fuel pressure connection while connecting the fuel pressure
gauge in order to avoid spillage.
5. Install the bleed hose into an approved container and open the valve to bleed the system pressure. The fuel connections are now safe for servicing.
6. Drain any fuel remaining in the fuel pressure gauge into an approved container.
7. Remove the J 34730-1A and install the fuel pressure port cap.