Montana AWD V6-3.4L VIN E (2004)
Mass Air Flow (MAF) Sensor: Service and Repair
MASS AIR FLOW (MAF) SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Turn OFF the ignition.
2. Disconnect the intake air temperature (IAT) sensor.
3. Disconnect the mass air flow (MAF) sensor (1).
4. Remove the air inlet duct from the MAF sensor and the throttle body.
5. Remove the MAF sensor from the air filter housing.
INSTALLATION PROCEDURE
1. Install the MAF sensor to the air filter housing.
2. Install the air inlet duct to the MAF sensor and throttle body.
3. Connect the IAT sensor (1).
4. Connect the MAF sensor.
