Montana AWD V6-3.4L VIN E (2004)
Relay Box: Service and Repair
Underhood Electrical Center or Junction Block Replacement
UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK REPLACEMENT
REMOVAL PROCEDURE
1. Open and support the hood.
2. Remove the cover from the underhood electrical center.
3. Remove the bolt retaining the underhood electrical center to the upper tie bar.
4. Rotate and remove the electrical center from the right sheet metal diagonal brace.
5. Remove the right sheet metal diagonal brace.
6. Disconnect the negative battery cable.
7. Remove the nut (1) retaining the positive battery cable to the underhood electrical center.
