Montana AWD V6-3.4L VIN E (2004)
3. Align the SIR coil assembly (1) with the horn tower on the turn signal cancel cam assembly (2).
4. Slide the SIR coil (4) onto the steering shaft assembly (2).
5. Firmly seat the retaining ring (3) into the groove on the steering shaft assembly (2).
6. Remove and discard the centering tab from the new SIR coil (4).
NOTE: Refer to Fastener Notice in Service Precautions.
7. Install the upper trim cover (1) and secure by using 2 TORX(R) head screws (2).
Tighten
