Montana AWD V6-3.4L VIN E (2004)
IMPORTANT: Refer to SIR Service Precautions before disabling the SIR system.
1. Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2. Turn OFF the ignition.
3. Remove the key from the ignition.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.
4. Remove the SIR fuse from the fuse block.
5. Remove the left instrument panel insulator panel.
6. Remove the connector position assurance (CPA) (3) from the steering wheel module coil yellow 4-way connector (2) located at the base of the
steering column.
7. Disconnect the steering wheel module coil yellow 4-way connector (2).
8. Remove the instrument panel (I/P) compartment.
9. Remove the CPA (2) from the instrument panel (I/P) module yellow 4-way connector (1) located behind the right side insulator panel.
10. Disconnect the I/P module yellow 4-way connector (1).
