Montana AWD V6-3.4L VIN E (2004)
Seat Belt: Service and Repair
Center Rear (Full Bench)
SEAT BELT REPLACEMENT - CENTER REAR (FULL BENCH)
REMOVAL PROCEDURE
1. Remove the convenience storage tray, if equipped.
2. Remove the bolts securing the belts to the seat cushion frame.
3. Remove the center belts from the seat.
INSTALLATION PROCEDURE
1. Install the center belts to the seat.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the bolts securing the center belts to the seat cushion frame.
Tighten
Tighten the bolts to 53 N.m (39 lb ft).
