Montana AWD V6-3.4L VIN E (2004)
Seat Belt Retractor: Service and Repair
Left Front
SEAT BELT RETRACTOR REPLACEMENT - LEFT FRONT
TOOLS REQUIRED
J 29843-9 Door Lock Striker and Seat Belt TORX(R) Wrench
REMOVAL PROCEDURE
IMPORTANT: The driver's front seat belt assembly attaches to the body side frame locking B-pillar.
1. Remove the shoulder belt guide plastic cover (2).
2. Remove the anchor nut from the seat belt upper guide loop.
3. Remove the center pillar upper trim panel.
4. Remove the center pillar lower trim panel.
5. Remove the plastic escutcheon (3) where the retractor side seat belt webbing exits B-pillar trim.
6. Use the J 29843-9 in order to remove the bolt (3) from the seat belt retractor (2).
7. Remove the seat belt retractor from the B-pillar (1).
8. Remove the 2 nuts securing the front seat to the floor.
9. Remove the 2 nuts securing the front seat to the floor.
