Montana AWD V6-3.4L VIN E (2004)
Brake Light Switch: Service and Repair
STOP LAMP SWITCH REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left side of the instrument panel insulator.
2. Disconnect the electrical connectors from the stop light switch.
3. Remove the stop lamp switch (1) from the brake pedal bracket (2).
INSTALLATION PROCEDURE
1. Install the stop lamp switch (1) to the brake pedal bracket (2).
2. Connect the electrical connectors to the stop light switch.
3. Install the left side of the instrument panel insulator.
4. Adjust the stop lamp switch.
