Montana AWD V6-3.4L VIN E (2004)
Power Window Switch: Service and Repair
Power Window Switch Replacement - Right Front
Power Window Switch Replacement - Right Front
Removal Procedure
1. Use a flat-bladed tool at the rear of the switch mounting plate in order to release the clip.
2. Lift up in order to unsnap the switch mounting plate from the front door trim panel.
3. Disconnect the electrical connectors.
4. Unsnap the power window switch from the switch mounting plate.
Installation Procedure
1. Install the power window switch to the switch mounting plate.
2. Connect the electrical connectors.
3. Install the switch mounting plate to the front door trim panel.
Insert the front edge into the trim panel and snap down the rear of the switch mounting plate to the front door trim panel.
