Montana AWD V6-3.4L VIN E (2004)
11. Remove the air compressor bolts.
12. Remove the air compressor from the air compressor bracket.
13. Remove the air compressor filter hose from the air compressor at 2 places.
Installation Procedure
1. Install the air compressor filter hose to the air compressor at 2 places.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the air compressor to the air compressor bracket.
^
Tighten the bracket to 50 Nm (37 lb in).
3. Install the air compressor bolts/screws.
^
Tighten the air compressor bolts/screws to 4 Nm (35 lb in).
4. Install the air compressor shield.
^
Tighten the bolts to 3 Nm (27 lb in).
5. Install the air compressor relay to the air compressor bracket.
6. Install the air compressor dryer.
