Montana AWD V6-3.4L VIN E (2004)
Notice: Refer to Fastener Notice in Service and Precautions.
4. Install the manual 2-1 band servo cover bolts (103).
Tighten the bolts (103) to 25 Nm (18 ft. lbs.).
5. Install the accumulator (132).
6. Install the lube oil pipe (130) into the case at the lube hole for the front differential carrier internal gear.
7. Use a flat-bladed tool in order to lock the lube oil pipe retainer (129) into the case.
8. Install the accumulator bolts (131).
Tighten the bolts (131) to 12 Nm (106 inch lbs.).
9. If removed, install a new filter seal.
10. Install the filter. Refer to Oil Filter and Seal Replacement.
11. Install the oil pan. Refer to Oil Pan Replacement.
12. Lower the vehicle.