Montana AWD V6-3.4L VIN E (2004)
Transmission Position Switch/Sensor: Service and Repair
PNP Switch Replacement
^
Tool Required
-
J 41545 Park/Neutral Switch Aligner
Removal Procedure
1. Apply the parking brake.
2. Block the wheels.
3. Shift the transmission into Neutral.
4. Remove the throttle body air inlet duct. Refer to Air Cleaner Element Replacement.
5. Use a flat-bladed tool in order to remove the automatic transaxle range selector cable from the cable lever.
6. Remove the electrical connectors.
7. Remove the automatic transaxle range selector lever. Refer to Automatic Transmission Range Selector Cable Lever Replacement.