Montana AWD V6-3.4L VIN E (2004)
3. Connect J 45096 to the vehicle 12V DC power source by connecting the red battery clip to the positive, +, battery post on the vehicle and connect
the negative lead to a known good chassis ground.
4. Turn the main power switch to the ON position.
Notice: Do not overfill the supply vessel. Damage to the unit may result. To verify the fluid level, view the LCD screen display while tilling the unit,
to ensure the fluid level does not exceed 30 L (32 qt).
5. Fill the supply tank with Dexron III/Mercon®, or equivalent, through the fill port.
6. Reinstall and tighten the fill cap.
