Montana AWD V6-3.4L VIN E (2004)
Torque Tube: Service and Repair
Torque Tube Assembly Replacement
Torque Tube Assembly Replacement
^
Tools Required
-
J 44915 Seal Installer
Removal Procedure
1. Raise and support the vehicle.
2. Position a jack stand under the front of the rear differential and firmly secure the differential to the jack.
3. Remove the front propeller shaft.
4. Remove the bolts (5) from the torque tube bracket (4).
5. Loosen, but do not remove, the torque tube-to-bracket through bolt (7) and nut (1).
6. Remove the torque tube-to-differential bolts (1).