Montana FWD V6-3.4L VIN E (2005)
8. Install the auxiliary TXV line block fitting retaining bolt.
Tighten
Tighten the nut to 11 Nm (97 lb in).
9. Install the auxiliary TXV line clamp to the HVAC module assembly.
10. Install the auxiliary TXV line clamp screw.
Tighten
Tighten the screw to 1.6 Nm (14 lb in).
11. Install a new foam wrap to the auxiliary TXV.
12. Evacuate and recharge the A/C system.
13. Leak test the fittings of the component using J 39400-A.
14. Install the left lower quarter trim panel.
