Montana FWD V6-3.4L VIN E (2005)
Windshield Washer Pump: Service and Repair
Washer Pump Replacement
WASHER PUMP REPLACEMENT
REMOVAL PROCEDURE
1. Remove the washer solvent from the washer solvent container.
2. Disconnect the front washer pump electrical connector.
3. Disconnect the front washer pump hose.
4. Using a small flat-bladed tool, remove the front washer pump from the washer solvent container.
5. Using a small flat-bladed tool, remove the seal from the washer solvent container.
INSTALLATION PROCEDURE
1. Position the seal to the washer solvent container pressing in until fully seated.
2. Position the front washer pump to the washer solvent container pressing in until fully seated.
3. Connect the front washer pump hose.
4. Connect the front washer pump electrical connector.
5. Fill the washer solvent container with washer solvent.
