Montana SV6 V6-3.9L (2007)
1. Install the coaxial cable.
2. Install the cable clips to the I/P frame.
3. Install the bolt to the ground tab on the right side on the I/P.
4. Install and tighten the coaxial cable to the VIU/VCU module.
5. Retape the cable to the A-pillar.
6. Install and tighten the coaxial cable to the cellular antenna on the windshield.
7. Install the garnish molding to the right side windshield pillar.
8. Install the I/P trim pad.