Montana SV6 V6-3.9L (2007)
4. Join the loose end of the front door opening weatherstrip to the seated end.
5. Use the end of the tear strip at the front door opening weatherstrip in order to pull the weatherstrip to the top and bottom of the instrument panel.
Important: Removing the tear strip should pull the inner lip of the front door opening weatherstrip out over the trim. Determine if
spooning of the front door opening weatherstrip is needed in order to complete the installation.
6. Cut the tear strip for removal.
7. If using the old weatherstrip, hand spoon the lip over the interior trim.
8. Inspect the front door opening weatherstrip for creases or wrinkles.
9. Install the front door opening sill plates. Refer to Door Sill Plate Replacement (Door) Door Sill Plate Replacement (Sliding Door).
