Montana SV6 V6-3.9L (2007)
5. Install the hood release handle to the I/P.
Notice: Refer to Fastener Notice.
6. Install the screws to the hood release handle.
Tighten the screws to 2 N.m (18 lb in).
7. Install the knee bolster.
5. Install the hood release handle to the I/P.
Notice: Refer to Fastener Notice.
6. Install the screws to the hood release handle.
Tighten the screws to 2 N.m (18 lb in).
7. Install the knee bolster.