Montana SV6 V6-3.9L (2007)
Trunk / Liftgate Weatherstrip: Service and Repair
Liftgate Weatherstrip Replacement
Liftgate Weatherstrip Replacement
Removal Procedure
1. Open the liftgate.
2. Remove the liftgate sill plate. Refer to Liftgate Door Sill Plate Replacement.
3. Pull the liftgate weatherstrip from the liftgate opening.
4. Clean all adhesive from the liftgate opening pinch-weld flange.
Installation Procedure
Important: A mastic/sealer/glue is inside of new liftgate weatherstrips. If a new weatherstrip in being installed, weatherstrip adhesive
should not be used.
If the liftgate weatherstrip is reused, weatherstrip adhesive should be used.
