Montana SV6 V6-3.9L (2007)
5. Remove the trim panel from the liftgate.
Installation Procedure
1. Align the liftgate trim panel studs to the holes in the liftgate.
2. Align the upper edge of the liftgate trim panel to the top center of the liftgate.
3. Install the upper edge of the liftgate trim panel to the top center of the liftgate.
4. Push on the liftgate trim panel in the four corners and center to secure the trim panel retainers.
5. Install the liftgate pull strap.
6. Install the right and left wedges on the liftgate.
7. Close the liftgate.
Liftgate Water Deflector Replacement
Liftgate Water Deflector Replacement
Removal Procedure