Montana SV6 V6-3.9L (2007)
1. Coat the ends of the pushrods using prelube.
2. Install the pushrods.
^
The intake pushrods are identified with yellow stripes.
^
The exhaust pushrods are identified with blue stripes.
3. Ensure that the pushrods seat in the lifter bore.
4. Coat the rocker arm friction surfaces using prelube.
Important: Shims (88894006) may be required under the valve rocker arm pedestals if reconditioning has been performed on the cylinder
head or its components.
5. Install the rocker arms.
Notice: Refer to Fastener Notice.
6. Install the rocker arm bolts.
Tighten the bolts to 34 N.m (25 lb ft).
7. Install the valve rocker arm covers.