Montana SV6 V6-3.9L (2007)
3. Install the valve rocker arm cover.
Notice: Refer to Fastener Notice.
Important: Use an alternating criss-cross pattern when tightening the valve rocker cover bolts. Failure to do so may result in oil leakage
from the valve cover due to improper seating of the gasket.
4. Install the valve rocker arm cover bolts.
Tighten the bolts to 10 N.m (89 lb in).
5. Install the right engine mount strut.
6. Connect the PCV foul air tube to the PCV valve.
