Montana SV6 V6-3.9L (2007)
1. Install the defrost actuator (3).
Notice: Refer to Fastener Notice.
2. Install the defrost actuator bolts/screws (4).
Tighten the screws to 1.2 N.m (11 lb in).
3. Connect the defrost actuator electrical connector (2).
4. Install the driver side knee bolster.
5. Re-calibrate the actuators. Refer to Actuators Recalibration. See: Testing and Inspection/Programming and Relearning
Mode Actuator Replacement
Mode Actuator Replacement
