Montana SV6 V6-3.9L (2007)
9. Remove the auxiliary blower motor mounting screws.
10. Remove the auxiliary blower motor from the blower motor housing.
Installation Procedure
1. Install the auxiliary blower motor to the blower motor housing.
Notice: Refer to Fastener Notice.
2. Install the auxiliary blower motor mounting screws.
Tighten the screws to 1.6 N.m (14 lb in).
3. Install the blower motor housing to the auxiliary HVAC module assembly.
Align the rear tabs of the blower motor housing to the HVAC module.
4. Install the auxiliary blower motor housing screws.
