Montana SV6 V6-3.9L (2007)
Outside Temperature Display Sensor: Service and Repair
Ambient Air Temperature Sensor Replacement
Ambient Air Temperature Sensor Replacement
Removal Procedure
The radiator support flange mounts the ambient outside air temperature sensor near the radiator baffle. A 2-wire weather pack electrical connector
attaches the ambient outside air temperature sensor to the forward lamp harness. In order to service the ambient outside air temperature sensor, perform
the following steps:
1. Disconnect the electrical connector (3) from the outside ambient air temperature sensor through the fascia opening.
2. Remove the push in retainer (2).
3. Remove the outside ambient air temperature sensor (1) from the vehicle.
Installation Procedure
