Montana SV6 V6-3.9L (2007)
13. Position the engine lift bracket and install the 3 bolts.
Tighten the engine lift bracket bolts to 50 N.m (37 lb ft).
14. Position the drive belt idler pulley and install the bolt.
Tighten the drive belt idler pulley bolt to 50 N.m (37 lb ft).
15. Install the washer solvent container.
16. Install the drive belt.
17. Install the intake manifold cover.
18. Fill and bleed the power steering system. Refer to Power Steering System Bleeding.
