Montana SV6 V6-3.9L (2007)
Ignition Cable: Service and Repair
Spark Plug Wire Replacement
Removal Procedure
Notice: Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the
wire could be damaged.
1. Remove the intake manifold cover.
2. Disconnect the left side spark plug wires from the spark plugs.
3. Disconnect the left side spark plug wires from the ignition coil.
4. If replacing only one plug wire, open the retaining clips and remove the spark plug wire.
5. Remove the left side spark plug wire clips from the intake manifold bracket and heater inlet and outlet pipe.
6. Remove the spark plug wire assembly.
