Montana SV6 V6-3.9L (2007)
Air Filter Element: Service and Repair
Air Cleaner Element Replacement
Removal Procedure
1. Remove the air cleaner outlet duct.
2. Remove the air cleaner side cover and disconnect the mass air flow (MAF) sensor electrical connector.
3. Remove the air cleaner element (1) from the air cleaner housing (2).
Installation Procedure
1. Install the air cleaner element (1) into the air cleaner housing (2).
2. Install the air cleaner side cover and connect the MAF sensor electrical connector.
3. Install the air cleaner outlet duct.