pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

ABOUT US
Crankshaft Position Sensor Replacement|Page 10285 > < Crankshaft Position Sensor Replacement

Montana SV6 V6-3.9L (2007)

Page 2
background image

Notice:  Refer to Fastener Notice.

3.  Install the CKP sensor stud (2).

Tighten the stud to 10 N.m (89 lb in).

4.  Connect the engine harness electrical connector to the CKP sensor.
5.   Install the exhaust manifold.

Crankshaft Position Sensor Replacement|Page 10285 > < Crankshaft Position Sensor Replacement